It depends on how much wear is on the rotors. The can be turned if there is enough clearence to do so. Ir they're not warped, grooved or other wise damaged don't wast your time or money.
You should have your rotors checked and possibly turned or replaced as necessary You should have your rotors checked and possibly turned or replaced as necessary
Most of the time, you can get by with just replacing the pads. The rotors generally do not need to be turned if there is no pedal pulsation or vibration. Rotors will need to be replaced if the exceed the minimum thickness which is stamped on the web (area with lug holes).
Warped rotors is the most likely cause. Have the rotors turned or replaced and new pads installed.
Most likely needs the front rotors turned or replaced.
Warped rotors. They need to be removed, turned or replaced.
depends how badly pitted---you can usually get away with having them turned
No it will not, The front brake rotors are out of round. Needs replaced are turned, both rotors.
Your rotors are warped. You need new brake pads and the rotors turned at a machine shop or replaced.
CHECK WHEEL BEARINGS
yes they need turned or replaced, 65;
Not usually required but recommended. If the surface of your rotors have any grooves or gouges, then yes definatly have them "turned" at a shop or replaced. If your brake pads are replaced regularly then you should be fine.
Yes, some rotors can be turned if there is enough material to work with. I would check my local parts store and check the price of a new one cause sometimes the cost is about the same.