0
definitely.take it off and send to your favorite chrome plating business and they will do it.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What type of fan blade do you need for a serpentine belt on zz4 motor?
a reverse fan blade and fan clutch
How Remove fan blade from 1999 Dodge 3.9 magnum?
The wench will be used to remove the clutch fan nut. Remove the nuts holding the fan then remove the fan blade.
Chevy 1996 z71 how to remove fan clutch blade to get to timing chain?
Unless the fan clutch is bad just remove it with the water pump. Otherwise it is a 36mm fan clutch wrench that most auto parts stores have for rent.
How do you know when the fan clutch in a 2003 GMC envoy needs replaced?
Some indications you need to have the fan clutch replaced are an engine that overheats and too much play in the clutch fan. Another clue is if the fan blade freezes up or if the thermal spring is loose or worn out.
How do I hold the water pump from turning to replace a Clutch fan?
You need to put a block of wood against the blade of the fan in a way as to prevent the fan from turning. It is advised to wrap this block in an old towel or large rag to protect the fan blade.
Can you install an after market flex fan blade to a 1998 Chevy Tahoe fan clutch The Tahoe is reverse direction does that make a difference?
There is a difference, it will not work.
Do 1971 Buick Rivieras with a 455ci engine have a 5 blade or 7 blade fan?
From my recollection, they had 5-bladed fans attached to heavy-duty fluid fan clutches that were controlled by both rpm and temperature. If you have an overheating issue, I would first suspect the fan-clutch.
Which way does the fan blade turn to remove?
Assuming you've got the correct fan clutch wrenches, it's generally counter clockwise to spin the fan off. Sometimes they're just hard to separate
Will the nut on the fan clutch tighten when engine is running?
Generally if it is a thread on fan clutch, yes.Generally if it is a thread on fan clutch, yes.
What puts out more air- a two blade fan or a four blade fan?
four blade
Should you be able to stop the cooling fan while the engine is running?
if fan is belt driven you have a worn fan clutch check where shaft enters clutch if there is any leaks or clumps of road grime sticking to fan clutch its lost its internal oil supply causing slippage some clutches will slip when engine is cold and automatically spin faster as temp rises this is called a thermostatically controlled fan clutch also w/engine off grab fan firmly and check for any play between blade and shaft replace as needed
Can a Blown catalytic converter cause mustang to over heat?
No, it cant. Check your thermostat to see if it is functioning properly. Next and the most important check is to do a fan clutch test. 1. Shut of engine 2. Spin the radiator fan blade. 3. If your fan clutch is working ( dampened) it should only turn 1/2 to maybe 1 revolution. If it continues to spin, then the fan clutch is shot and you are not pulling in any air to cool the radiator. If this is the case, replace the fan ( clutch comes with the fan). This answer does not pertain to electric fans
