NO there is no ADJUSTMENT on the TBI / Throttle body. If the check engine light is on then you need to have the engine scanned with an engine scanner to see what is going on with the emissions system / engine sensers.
where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.
A blown fuse can make your dashboard lights to not work in your 1993 Chevy Blazer Tahoe. A burned out bulb can also cause this.
The hottest they make for the 1993 Astro is 195 deg., so if you are lower then that you can put one of them in.
yes most Chevy motors are able to be but in any other Chevy u just have to make sure the the intake system stays the same
The only adjustment that you can lean out would be the idle circuit. That would be done by adjusting the idle mixture screw(s) while monitoring the vacuum and or the engine rpms. To make a carburetor run lean would require changing internal parts such as the jets and metering rods.
Lean-tos' features
frist make syre your rear brakes are ajusted properly then try your parking brake
Shorten it to make it downshift sooner. Lengthen it to downshift later at a higher power setting.
In a fuel injected car, the oxygen sensor would adjust for any lean condition. More fuel is generally needed for cold air conditions.
It backfires because it's lean. The trick is to figure out why. Check your vacuum lines and anything that could obstruct fuel flow.
Yes. You can. You just have to swap and make sure you have the same set up. Or do custom work.
adjust your lifters and valves under your valve covers to spec. look in your heyens manuel.