Yep, it's really easy, just find the two water hoses which go into the firewall, below the blower motor on the passenger side, remove the clamps of both hoses, then cut a 5 inch piece of a broom handle (wooden), slide both hoses over it, tighten the clamps and it's done, now you could do this with really short hoses, or even block the passages leaving the engine with welded caps to make it look neat.
good luck
No , if you were to bypass the heater core , you would have no heat
you would have to bypass the heater core first.
Heater coolant bypass pipe It would be the return hose for the heater.
did the heater core start leaking? anyway you should have no problem with the air if you bypass the heater core.
Upper and lower radiator, inlet and outlet heater core, bypass,Upper and lower radiator, inlet and outlet heater core, bypass,
NO! THE HEATER CORE IS YOUR CARS HEAT SOURCE YOU CAN BYPASS BUT IS NOT A GOOD IDEAL IN WINTER!
no , the heater core provides heat to the interior for the passengers
You can bypass your 1988 Buick Skylark heater core by removing the heater core water supply hoses. There will be to water hoses. Connect the water hoses to each other.
no u will have no heat
Yes.
Nothing
just splice the two heater hoses that go through to the heater core the together