The 1996 Camry V6 engine has the front pipe assembly and converter all in 1 piece. For some reason, Toyota welded the converter to the pipe assembly at the front, while the rear of the converter bolts to the tailpipe. The assembly is $230.00 USD from Car Stuff (Eastern converter product) in the U.S., and I found a Canadian source through Speedy Muffler (LaPointe), $472.86 CDN
So you can efficiently burn unleaded gas.
The oxygen sensors are in two spots on a 2005 Toyota Camry. They are on either side of the catalytic converter, which makes up part ofÊthe exhaust pipe.
It has two of them. One is before catalytic converter and second one is after.
AnswerCrawl under the car. You will see a muffler, and a catalytic converter which look similar. The converter is the one closest to the engine.If it's a 4 cyl. It should be between the exhaust manifold and engine pipe.
The 2002 2.4L has 4. 2 on the exhaust manifolds, one before the catalytic converter and one after.
The 2002 Toyota Camry XLE has four oxygen sensors. There are two sensors on the exhaust manifold ,and one before and one after the catalytic converter.
You get a catalitic converter with flex pipe on ebay.com for arround $300 and labor will at least one hour (depends on region). You are facing a bill about ~$400.
There are 3 Oxygen Sensors on a 97 Toyota Camry with a 3.0 liter v6.An oxygen sensor is mounted on each exhaust manifold (left and right), And the third is mounted on the exhaust pipe after the catalytic converter.
Cat and ECU are covered under the 8 years/80,000 miles federal emissions warranty.
How do you change a fuel injector on a 1988 Toyota Camry
how do you change turn signal switch on 1999 toyota camry
The sensor 2 should be next to the catalytic converter just under the passenger seat. The sensor 1 is in the exhaust manifold.