0
Can you make several computers see each other off of the switch used for there DSL connection?
TheNewbie
Yes you can if you go to the control panel select the network setup wizard and follow the on screen instructions
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do I create a local area connection in vista?
Vista supports plug and play for CAT5 or CAT6 cables. Simply plug the computer into a switch along with the other computers that are going to be in the LAN. If there is to be a shared internet connection, use a router instead of a switch.
Why does my twenty computers connected to switch have limited connectivity?
They're probably set up to use DHCP to obtain an IP address from the router. It's likely you don't have a working connection to your router. Make sure your switch is connected to the router, and not just the other computers.
I can't get the internet to work on my imb thinkpad laptop?
What kind of connection do you use? Do you have firewall? If you use lan connection check cables, check switch or modem restart it, if you need. If you use wireless connection check your adapter, check with other computers presence of internet.
How do you create 5 COMPUTER network?
You need: * 5 Computers * A at least 5 ports switch * 5 adequate long CAT5 cables to connect switch and computers Connect one end of every cable to the switch. And the other ends to computers. Power up the switch. Be sure all computers are in the same WORKGROUP.
I got a fast connection but how can I stop YouTube videos from freezing?
Video is both bandwidth (internet connection) and processor (your computers power) intensive. If your computer is more than several years old or was a low end model, it is likely that your computers processing powers are limiting playback. Other possible reasons include outdated browsers or other problems with your operating system
How do you setup a computer network?
If the computer network is to have internet, then you would need a modem connected via a phone line or cable connection. Then the modem is usually connected to a Router, that in turn connects to a "Switch". All the computers then connect to the Switch through ethernet cable (cat5 or cat6). One computer is often designated as the "Server", a central point to hold the programs and data for the other computers (clients) to use. INTERNET --> MODEM--> ROUTER --> SWITCH --> SERVER --> COMPUTERS (In some cases, the router can also serve as the switch as well).
How are computers joined with each other in an area?
A network via cable or telephone connection.
What other devices that can be used in networking a computers without using RJ45?
You can wireless connection.
What is a network of computers that allow each other access to their files printers Internet connection or other resources?
Workgroup
Why does one of your computers find your wlan but the other one don't when they are right next to each other?
There are multiple reasons for that. If you are using wireless interface, you have interference caused one of the computers. If you are using LAN, you have problems with connection. It can be anything starting from NIC, and ending with the fact the one of router/switch ports does not work properly. And of course check the cable.
Tips On How to Install a Network Switch?
Network switches allow multiple computers to use a single internet connection. However, the network switch manages the network traffic as well. The way in which switches handle network traffic can differ, but they are all installed in the same fashion. • Plug the switch in to provide power to the unit. • Connect the cable of the incoming network to the switch. It does not matter which slot you plug the switch into, any of them will do the job just the same. For those who are hooking up a switch in the home, the incoming cable should be the one coming from your modem. • Next you will want to connect a Cat5 or Cat6 cable into another slot in the switch. Then you will want to connect the opposite end of that cable into a computer you wish to be connected to the network. • Once you have completed this step, you will want to follow the same steps for any other devices you want to connect, or until all the slots are full. If you only want two computers to be connected then you only have to proceed with these steps one more time. • Once you have connected all computers that will use the switch, you have finished the task at hand. You now have a switch for all computers connected! Connecting a network switch is a fairly simple task, as long as you know which computers will be connected to the device. Also, ensure that the cable(s) you are using are able to reach securely from the computer to the networking switch in order to create a good connection between the devices. Now you are able to share an internet connection between multiple computers in your home or office.
What is a small inexpensive device that joins multiple computers together?
There are loads! USB cables with double A type connectors can, WiFi can be used either directly or indirectly via a router/hub. Serial cables can be used to do a direct transfer although it has a slow baud rate. You can use 2 network cables vis a hub, switch or router - you can also use a single network cable if its a crossover cable. You can use bluetooth, Infa-red or any other number of wireless mesiums. I've used an old parallel printer cable before! Either way - you need 3 common elements to do a transfer: - A physical connection - the hardware used to make the transfer - A logical connection - a common language (or protocol) for the physical hardware to 'talk' with and - An application connection. usually an operating system, FTP program, web browser, firmware - something to build and deconstruct the data sent over the connection
