Only if the 'flat paint' is water based too.
As long as you find that aesthetically pleasing, I don't see why not.
Yes.Clean if well. Use a wire wheel to rub off any rusty loose paint.Go to a paint store (not a big box). MAB makes a primer called SuperBond. It will bond to the finish. Paint the are with the primer. You now have a surface that will take any kind of paint.
The flat latex paint will stick to satin or semi-gloss latex paint without any problems. The main consern is making sure the surface is clean and sound before begining to paint, plus use top quality paints for the best results.
Yes it does. Many oil based primers can be used as a flat paint also. Normally, the primer will cure too hard to be used as a primer coat within two weeks, but it is a hard, flat to low sheen surface. In fact, you can make a chalkboard paint in almost any color out of oil based primer if you let the surface cure for a couple of weeks. Enamel undercoater will not work in the same way though.
Yes you can. If you are painting a wall, make sure to wash it first with soap and warm water, then rinse thoroughly and sand down any bumps or shiny spots. It's also best to use a primer before painting in order to ensure proper adhesion to the wall. You can get a primer tinted to match the new paint color.
Yes.
As long as you find that aesthetically pleasing, I don't see why not.
Yes.Clean if well. Use a wire wheel to rub off any rusty loose paint.Go to a paint store (not a big box). MAB makes a primer called SuperBond. It will bond to the finish. Paint the are with the primer. You now have a surface that will take any kind of paint.
The flat latex paint will stick to satin or semi-gloss latex paint without any problems. The main consern is making sure the surface is clean and sound before begining to paint, plus use top quality paints for the best results.
Yes, as long as you have the same base that's not a problem.
Yes it does. Many oil based primers can be used as a flat paint also. Normally, the primer will cure too hard to be used as a primer coat within two weeks, but it is a hard, flat to low sheen surface. In fact, you can make a chalkboard paint in almost any color out of oil based primer if you let the surface cure for a couple of weeks. Enamel undercoater will not work in the same way though.
Yes you can. If you are painting a wall, make sure to wash it first with soap and warm water, then rinse thoroughly and sand down any bumps or shiny spots. It's also best to use a primer before painting in order to ensure proper adhesion to the wall. You can get a primer tinted to match the new paint color.
Spraying the frame of a metal bed is quite tricky. You can use a metal paint primer. Most paint professionals use "Flat paint" as a primer because it mixes with other products. So no worries on the rust preventative enamels and latex enamels.
Tremclad makes it in regular paint or spray. The spray is better, especially if sprayed over a flat white primer they also make.
"flat" paint is flat flat -- no sheen at all. My understanding is that "flat enamel" has a very slight sheen -- like about 6%, which supposedly makes it a little easier to clean than the flat flat paint. But, it's pretty hard to distinguish one from the other.
I'm not an expert, but if you paint the gloss paint with flat paint or primer and then rough the paint or scratch grooves in the paint your plaster should stick. Your grooves might need to be fairly deep. Not so deep as to go through the original plaster or drywall (depending on the original surface), but as deep as you can go. A cross-hatching pattern would probably be best. You may have to sand the paint off. I have gotten lucky in the past and have not had to.
Base paint is also known as flat paint, or flat wall paint, or matt paint and is a latex paint. Flat paint is just that, flat or dull with no sheen at all. Semi-gloss is an enamel that dries very hard and can be found in a low sheen (satin) a medium sheen (semi-gloss) and a high sheen (high gloss) Flat paint is usually used on walls and ceilings where as semi-gloss is used in kitchens, bathrooms, doors an jambs because it helps hold back the inherent moisture in those areas.