0
Can you mix your clear coat with the paint and how much clear coat should i use?
Wiki User
∙ 14y ago
Mixing clearcoat with paint, will ruin the paint.
For enamel paints, make sure you use an enamel clearcoat. You should allow the paint to fully cure (at least a week) before attempting to apply the clearcoat. Never use a lacquer based clearcoat on an enamel based paint. It will ruin it.
For lacquer based paint, you should only use a lacquer based clearcoat. The paint should be dry, but does not have to be fully cured, since the lacquer will wet the coat of paint below it anyway.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How much paint base coat clear coat primer and color is needed by an OEM for a new standard vehicle?
balls
Can you take your car to a paint shop and just ask for a clear coat?
You can, it depends what you expect in terms of finish quality. You must also consider that there is not much difference in price when it comes to spraying paint and clear coat then clear coat only you still have to sand paint buff the only difference is maybe one or two hours clear coat needs to be removed to apply new clear coat, clear coat also take a great amount of work after drying to achieve oem finish. The answer is yes however having gone that far might as well refresh it unless you just find the clear does not suit your vehicle but that is unlikely.
How much would it cost to get a car's paint sanded away then get the rust removed and then paint it black with green flame strip down the middle with a skull in the middle with a clear coat how much?
A bunch for sure
Can you use a latex paint over sashco log home stain?
I have a clear coat and a coat of capture log home stain (Sashco) on my log home, I would like to paint over it with a latex paint, is this possible?
Is varsol dangerous to car paint?
Varsol, like any other paint thinner can damage the finish of a car. If a small amount of it is splashed on the surface, wiping it up intermediately will not result in much damage, a good polishing will return the clear coat to a satisfactory shine. If a large amount is poured on the surface and/or allowed to stand, the clear-coat will be irrecoverably be damaged. Varsol and other paint thinners are commonly used to thin the paint used to paint cars (usually after-market) with no adverse effects at all.
What to do with peeling clear coat?
Not much you can do but strip it and repaint.
How much to paint a semi truck with sleeper?
Depending on what all you want but should range in the 6,000.00 to 10,000.00 range. The price will vary according to what type of paint you want to use and whether or not you want to disassemble all of the external hardware and trim before prepping for the paint job. Base-Coat Clear-Coat (Two-Stage) Paints cost more than single-stage (Acrylic Enamel or Urethane). Also some colors such as Reds and Yellows are more expensive also. A very quick "mask/prep/paint" job on a tractor could be performed for as little as $2800 on day cabs. But expect to pay up around the $10,000 range if disassembly is required and you want to use base-coat clear-coat.
What auto paint colors hold up best in the Texas heat?
Most colors are going to hold up in the heat no matter what color they are. They have a clear coat that protects the paint and it will not fade that much. The only way you can tell if your vehicle is fading is if you get into an accident and they only paint the areas that were affected.
How much per square foot to paint 3400 square feet of wall space with one coat of paint?
need price for 5800 sq. of block 1st. coat block fill 2nd. coat satin finish
How much should a good body shop charge to repaint a front bumper with no body damage just a sand re-paint and clear coat?
its hard to know without knowing what car its coming off of, or what color it is. but id say anywhere from 200 to 350 dollars.
How do you get rid of small scratches in the clear coat not through to the paint as they are white on the dark blue paint?
Silicone fluids containing amines can be used on scratches and rubbed with a muslin cloth will render the original look without white marks.Silicones wet the surface effectively and give transparency to the surface which will reflect the blue surface undernaeth.
How much does paint cost per square foot or meter?
Depends on the quality of the paint. To estimate the cost per square foot, divide the cost of the paint by 350, for square meters, divide the cost by 32.5 and that should give you a pretty good idea of what it will cost for one coat of paint.
