I have not heard of this swap before.
Get out your tape measure and figure it out.
The biggest problem with all Fiero V8 swaps is the tight clearance between the two strut towers.
Good Luck
No, it will not work. The 86 is a mechanically controlled transmission, vs. the electronically controlled transmission of the 96 (which also means the engine ECM will be programmed to function with that electronically controlled transmission).
The transmission is electronically controlled
You would need an electronically controlled engine with an ECM. The 700R4 in the 91 is a mechanically controlled transmission.. the 4L60E in the 95 is an electronically controlled transmission.
The transmission is a 4L60E which is an electronically controlled 700R4 based transmission.
Yes, a major one - the 1995 transmission is electronically controlled, and requires interfacing with the ECM. The 1992 transmission is mechanical, and will not be compatible with an electronically controlled engine.
Transmission is a 4 speed,, electronically controlled. with overdrive.
The automatic transmission in a 1995 Ford Explorer is electronically controlled
4 Speed Electronically Controlled Transmission. An automatic transmission with 4 forward gears and shifting that is controlled by a computer.
The Transmission on a 1994-1996 caprice is a 4L60E basically an electronically controlled version of the 700R4 which is hydraulically controlled.
the AODE is an electronically controlled transmission that is controlled by a separate computer this may not be a good idea for a novice.
A manual can; an automatic will not, as the 94 transmission will be electronically controlled, whereas the 86 would be mechanically controlled.
No , the 4R55E automatic transmission is ELECTRONICALLY controlled