Yes, you can, but I'm puzzled as to why you waste time staining it if it's just going to be painted over . Have I got the meaning correct.
***Be sure to use several coats of sanding sealer before applying the paint, as stain may try to ooze forth, over time.
If you want the paint to stay on the peice of furniture your painting, get some fine sandpaper and rough up your surface first. This will guarentee your paint wont flake off. Hope this helps.
lightly sand the surface first. then use an oil based primer, wich in return u can either go back with a latex based or oil based paint.
First you will need to apply a coat pf primer. Otherwise your paint will not adhere to the varnished paneling. Once the primer has dried you can apply nearly any paint to it you want.
Use an oil based varnish .
I just stained my front steps with stain I don’t like it what should I do
Yes, but why waste the varnish. - (it is meant for bare wood )
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
I am also looking for enterpris oil penitrating wood stain
You should check the label on the specific product you're planning to use. If the label states it will adhere to wood with an existing coating, then it's fine to use even over an oil-based stain. (This is because once thoroughly dried, oil-based stains behave the same as water-based stains.) Some products, however, will require the existing stain to be stripped from the wood, or to apply a primer coat over the existing finish before applying new stain.
Yes, just clean with a TSP solution, sand to remove the gloss, prime with an oil based primer, then paint with two coats of either a water or oil based alkyd paint for washability and durability.
Yes, but why waste the varnish. - (it is meant for bare wood )
Oil stain is for bringing out the colour in wood. -If you feel it needs a latex stain, just paint it over -I don't see the point.
NEGATIVE IT WILL PEEL
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
I am also looking for enterpris oil penitrating wood stain
Yes, if the oil stain is thoroughly dry. Use a Multi-purpose carpet glue.
You should check the label on the specific product you're planning to use. If the label states it will adhere to wood with an existing coating, then it's fine to use even over an oil-based stain. (This is because once thoroughly dried, oil-based stains behave the same as water-based stains.) Some products, however, will require the existing stain to be stripped from the wood, or to apply a primer coat over the existing finish before applying new stain.
It will fade over time. Not much else you can do that won't hurt your skin.
Yes, just clean with a TSP solution, sand to remove the gloss, prime with an oil based primer, then paint with two coats of either a water or oil based alkyd paint for washability and durability.
If the wood stain is oil based, good luck with that. Latex will dry over dry oil base, but not the reverse. Oil based paints need to penetrate the wood, which is obviously not possible with latex in the way. If the stain is water based, you should have a firm drying in about two hours, permanent in 24.
No, oil needs to penetrate the surface and the latex stain will inhibit that penetration.
Start with a primer, Perma Seal is great. then I would use oil based paint.