no,u can only plug in a PLUG to something
It is not advisable because the motor would run 20% faster which might produce damaging overpressure in the thermal circuit.
Yes, it can be and there is no problem at all Because most of the electrical appliances are made to work on 220v - 240v so it can also be plugged into a 240v outlet.
its ok..i found out that it can be done, as long as its not turned up to use more than 130amp.:)
Anything of such voltage will be burnt if plugged in a 230v socket outlet because the voltage is too high.
no way because frequency cannot change
it will not run
No bell wire is not meant to be 230V.
You will only get a secondary voltage of half of what it is supposed to be. This is a hypothetical question because a 120 volt plug (cap) will not fit into a 240 volt receptacle. The pin configurations will not align up.
Plug the bulbs in, one by one, and check to see if they have the correct brightness.
if you drove the 18V winding with 230V the transformer would burn out, if it didn't catch fire first
Yes, but you need an adapter for the plug. Ours has two pins only and ground is on the side. Voltage is 230V but your laptop should be able to handle it.
connect the Red Yellow blue phases