Yes, you can. Actually you don`t program the key. Key remains unchanged, you just program the car to accept this particular key.
you can't. it is internal to the eng computer. you have to have the new computer code programmed to start it from the dealer. OR, get a used computer that is already programmed!
Programmed to Love was created on 2000-09-05.
look in the owners manual
Behind the glove box.should be marked.
the different models are different weights but the lightest standard mondeo is around 1283kgs upto 1547 kgs for models between 2000 and 2002
they are a chain not a belt!!!!!!!!!!!!!
look at the parkers guide it will tell you there
its behind passenger side rear wheel near boot
From the 2000 Venture Owner's Manual To program the new key: 1. Insert the ignition key in the ignition and start the engine. If the engine will not start see your dealer for service. 2. After the engine has started, turn the key to OFF, and remove the key. 3. Insert the key to be programmed and turn it to RUN within 10 seconds of removing the previous key. 4. The SECURITY message will turn off once the key has been programmed. It may not be apparent that the SECURITY message went on due to how quickly the key is programmed. 5. Repeat Steps 1 through 4 if additional keys are to be programmed.
It don't have one it's controlled by engine temp sensor and ecu
2000
The Split Program was created in 2000.