The system must be evacuated first using a vacuum pump. then freon can be added to the low pressure side.
you need to put some freeon in it
air conditorner doesnt blow cold air has freeon compressor doesnt kick on
you need to drain all the freeon out of the system. take the belts off. and take the bolts on the compressor out. its best to get under the truck. and there is a lot of wiggling to get out.
if your uing air tools on the compressor then you will put one or two drops directly into the inlet where you connect the compressor hose
how many pounds of freeon di i add..an were do i put it in.does the air conditioner have to be on when charging
Recharging the system with Freeon Gas or Possible replacement of the Compressor! Just maybe, the belt needs tightening.
Yes you need an air compressor that will give you an adjustable air suspension.
You have to remove the air conditioning compressor bolts set the unit aside but do not remove the freeon hose. Then remove the mounting bracket and then you can get to the bypass hose to replace it. Replace mounting bracket and compressor and job is complete
freeon
You should not put any oil in a Ford air conditioning compressor. The air conditioning compressor runs on Freon. The system should take about one pound of Freon.
You have to get it recharged. you have no freeon left which makes the cold air
You should have the system checked for the proper amount of freeon. The compressor will not properly engage if the system is low. Hope this helps.