i dont know alot about toyotas but ive done it in my Dodge shadow.... if the engine blocks are the same and bolt up the same....then the only thing you might need to look into is the wiring harness and the computer for the turbo engine.. but before you do this i suggest getting the wiring book from the dealership for the car or just ...make it fit haha
the non turbo is 5sfe engine where as the turbo is a 3sgte engine. now you can do a swap [i suggest Google how to do so] but in order to not risk anything there are a few other things u need to swap such as the rear axles.
nonturbo 140,,,, turbo 200
can you add a turbo charger to a Toyota cressida with a 7m- ge non turbo engine?
2jzgte (Turbo) or 2jzge (Non Turbo) vvti engine
buy a new turbo and replace it
130hp for the normally aspirated engine (non turbo) and 200hp for the turbo engine.
yes
The Toyota Turbo diesel engine horsepower can range between 180 horsepower and 350 horsepower. The horsepower can be adjusted by the injector pump.
I have Toyota 2l-T engine the problem is the oil blowing on the exhaust is this the turbo charger problem?
If its a Tubro (7m-gte) then replace it with the turbo engine (7m-gte) If its non turbo, replace it with the non turbo. The Supras from 1986.5 to 1992 were all interchange able. In fact, the engines from the 79-86 Supras will bolt in as well, how ever they will not plug into your stock harness. The "M" series block is very very interchangeable. Also the 7m Series engine came in the Toyota Cressida of the same years....but only in non turbo form.
Your bearings are dieing, the turbo is done and you should replace it because a smoking turbo can ruin your engine because some parts of the turbo can be blow'd into the cylinders and your engine is toasted.
You can find a vacuum diagram for your 1987 2.4 liter nonturbo engine in most service manuals. The service manuals can be found at your local library.
Fuel leak.