Want this question answered?
how do i replace the front strut on 1999 Saab 9-3
there is a fatty that comes and does it
i have a 2001 BMW 540i and i would ;like to replace the front left strut my self. how would i go about it step by step?
Yes, most definitely. You must always replace struts and shocks in pairs. Replace one front shock or strut then you must replace both. Same for the rear.
It is located under the hood on the passenger side. Look on the front side of strut tower, it is mounted on the strut tower.
yes they are found for sale on e-bay they will convert front or rear to a standard strut. Strutmasters
To replace the front struts on a 2000 model Hyundai Sonata, you will first need to remove the tires. There will be 3 nuts on top of the strut mount. You will need to remove the 2 bolts that connect from the strut to the knuckle. Then you will need to remove the ABS sending unit as well as the front brake hose. Once these components are removed, you can remove the strut. In order to remove the strut, you will need a special tool to compress the spring. Once the struts are removed, you can safely replace them with new struts.
To replace the strut you have to jack up the car on the side you want to do and take off the wheel. Then, take it loose from the strut tower on the top. There are 3 or 4 nuts. Then take it loose from the steering knuckle on the bottom. The whole strut assembly lifts out. To replace the coil you have to have a strut compressor. It compresses the coil spring so the top of the strut can come off. Once the top of the strut is exposed the coil can be taken off the strut.
On a 2000 Lincoln LS : The FRONT suspension is a strut type suspension , so there are ( NO ) upper ball joints
The cost to replace a front strut rod bushing on a 1998 Nissan Maxima is between $50 and $150, for a person who does it on their own. The cost varies based on the part brand or kit bought.
Why not just ask how to perform brain surgery, and have someone type it in for you.....
Remove the bolt on the botton of the Strut. Detach the steering Knuckle. Remove the three nuts on top and remove the strut from the car. Do not try and disamble the strut without a spring compresor. Get a whole new strut. Good luck