You can, for about 10% of the price of a new pulley, but you need a bearing press or hydraulic press to do it properly. A new metal pulley usually costs around $30, but the bearing can be obtained for $3 to $4.
Failed water pump bearing.
It is 175 ft lbs for the front wheel bearing of a grand cherokee
The bearing has failed in the water pump. The pump will need replaced.
How do you change a 1998 Jeep grand Cherokee rear wheel bearing you will have to remove housing in rear, break down axel, pull the side you are working on away from the wheel & replace bearing, it also requires a special tool to get into the housing case
The bearing in the water pump has failed and the water pump will need replaced.
Yes, if the belt tension is not tight enough it won't spin the radiator fan due to slippage. Replace the tensioner pulley.
It shouldn't require pressing to remove the bearings.
How do I replace water pump on 2004 jeep grand Cherokee
Jeep grand Cherokees are normally more $ than regular Cherokees, the grand Cherokee was originally made to replace the Cherokee
its a pulley fan, it never goes bad
What device is it attached to?
already have it loose