yes but you have to push in your clutch start cancel button
just unplug the connector going to the switch that is mounted on top of your brake pedal and hook up a jumper wire to jump the 2 terminals (on the connector side not on the switch side) this will allow you to start the truck without pushing in the clutch and without pushing the clutch start cancel button.
The neutral safety switch on a 2002 Toyota Camry can be found in the driver side footwell. A neutral safety switch prevents a standard car from starting without having to press in the clutch and are mounted behind the clutch pedal.
1) Get into car 2) Put keys in ignition 3) Turn to "on" position 4) Apply Brake 5) Shift into neutral 6) Start the car
get in under the truck and unhook the transmission link and move it towards the back two clicks
the 92 4afe toyota engine does not have a crankshaft position sensor
on the transmission
where is the neutral safety on my 1987 4runner
Easy!! Put it on the neutral position. Press the gaz pedal to the end. When it goes cut off note the RPM. It's the RPM cut off minus 500RPM
where is the throttle position sensor on a 1998 Toyota 4runner???? can any one help???
The neutral safety switch is either not adjusted properly or is defective
If you cannot start it there is no choice. You have to use a tow truck. Because the transmission will not allow you to switch to neutral without starting the car. If you can start the car you can shift to neutral ask one of your friends with a tow rope in the trunk to tow your car where you want to.
Yes.