If it is a late model, and it sure would help if you had said what model and make it is, it could easily be an electrical failure in the valve body wiring, or a worn, scored, binding valve body spool or bore, or reverse clutch pack or piston seals, drum, band, or improper or worn out shift linkage if its a column shift. Older F-series Ford trucks are noted for this when the linkage is worn or improperly adjusted. If you have no transmission rebuild experience you need to take it to a transmission shop. This, in all likely hood, is a major internal failure.
truck will only go forward not in reverse does this mean the transmission is gone
car will jerk forward and then go in reverse
no it will cause u 2 go > slowly >=forward
I got VW sharan 2007 Auto Diesel cannot drive in Reverse while car cold after driveing hlf a Mile forward it fineplease help its been like this over a year
Most likely your transmission needs replaced.
The rear of the car will always go in the direction that you turned the wheel if you are in reverse. It's just like driving forward. If you want to go forward and right, turn the wheel to the right. If you are in reverse and want the rear of the car to move to the right, then turn the wheel to the right. To answer your question directly, the rear of the car will go to the right.
Shift linkages not put in the correct spots.
Sounds like it is not really in reverse-check trans to see what gear it's really in.
If you have an automatic transmission, it probably has a forward clutch/band problem.
Your arctic cat 580 will go in reverse and not forward because the reverse linkage is okay while the forward linkage is not.
When a Mercedes C280 will not move in forward or reverse it is an indication that the transmission is going out or has already gone out in the car. This is true of all cars, not just a Mercedes.
Do you mean the shifter or car physically does not move? BClear.