Unscrew the 4 screws holding the light covering and push softly on the bad bulb, turn right slightly and pull upward. Loom at side bumps to see which bump on the new bumd goes on which side of the light socket hole.
Yes
Brake system warning light.....
you need a new brake pressure differential switch
Brake light switch is defective or needs adjustment.
Don’t know
The break light coming on in your 1998 Toyota Tacoma Non-Prerunner might be due to a faulty braking sensor. It could also be the brake cylinder or slave cylinder causing the light to come on. The break fluid being full is a great place to start; check the brake slave cylinder next.
On my 1996 tacoma I do not have a gas light for low gas.
It means it's time to change your oil.
Short in the wiring or one of the tail light sockets is corroded or shorted out.
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
The switch at the parking brake in the cab needs adjustment, just loosen the retaining nut and move it closer to the pedal then tighten.
The check engine light in a 2004 Toyota Tacoma can come on for many reasons. It could indicate an exhaust leak or a problem with the engine.