When does it happen? Is it constant? What engine? How loud? how long does it last? Had the same thing in my Ram Truck found it to be the water pump. Possible failed belt tensioner.
For the 3.5L Engine it is on the top rear part of the engine facing towered the cabin. You will see the thick black hose coming out of it.
A 2000 Dodge Stratus has four engine mounts.
Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.
No, it will not interchange.
There is no difference in a 1995 dodge dakota with a 3.9 v6 engine and a 2000 dodge dakota with a 3.9 v6 engine and you can exchange the newer engine with the older one.
Where is the MAF sensor located on a 2000 Dodge Ram 1500
The engine codes for a 2000 Dodge would be either 2 digits long or 4 digits and start with a "P".The engine codes for a 2000 Dodge would be either 2 digits long or 4 digits and start with a "P".
Ignition timing for 2000 Dodge 3.9L engine is set and maintained automatically by the engine's electronic control module and is not possible to change.
If from the same engine, yes.If from the same engine, yes.
Dodge Recommends using 5w30 and it holds 6qts.
Yes. A 3.9 v6 engine from a 1995 Dodge Dakota will fit into a 2000 Dodge Dakota with a 3.9 v6 engine. You will have to swap the intake and exhaust manifolds along with all sensors and fuel rail though.
It is mounted on the engine and connected to the battery.