You can buy sheets of gasket material (usually cork) and trace out the gasket you need then cut it out with a pen knife. I've even used a piece of leather to make gaskets with.
It depends on what company they work for or if they are on their own. They could only make tips.
The cost to replace the head gasket is between $900 and $1200. The actual cost will vary between shops as each uses a different labor rate and there could be items that need to be repaired or replaced due to overheating that commonly occurs with a bad head gasket.
There are various costume suppliers that make them, but also you could try dance stores or online stores, even Ebay. You can make your own decorative tutu using lace or tulle.
Clown costumes are available year-round at www.buycostumes.com or any other good online costume shop -- or you could make your own with a little practice!
I had replaced the water pump and radiator. This had continued to overheat but not as bad. After replacing the head gasket it was finally fixed. I was able to answer my own question only after replacement.
sure you can pretty much make most of them except for the head gasket
A bad exhaust manifold gasket could do that.
It could.
They could make their own clothes more easily.
could be a possible blown head gasket
go to your local auto parts store. They should have different sizes and types of gasket material.
you could make observations and ask questions, then make and test your own hypothesis.
You could have a small head gasket leak and it is entering the piston chamber and burning up.
you mean like on a car? Probably not a seal exactly. But i know you can get gasket material to make gaskets from many auto parts stores.
There is no drain plug. You can try to suction out the lube but you really need to remove the rear cover to completely drain the differential. And buy a new gasket (or make your own from gasket stock material) to reinstall the cover; use a gasket sealant sparingly on the gasket and bolt threads to get a good seal.
lyrics
It is safe to repair and replace your own head gasket, but it is a very tricky operation and you may not have success unless you have experience with cars.