0
Read the owners manual in the link below. It will explain how to restring the trimmer.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you change the spool on a craftsman bushwacker weed eater?
I can't seem to get the spool off.
Cant get the spool out of a craftsman line trimmer?
1. Rotate spool to line up arrows on spool and surrounding casing. 2. Find notch and pry with wide flat-end screwdriver. 3. Spool will pop out.
Looking for Craftsman 24 Volt Weed Wacker part number 71.74805?
Need full spool replacement
Fuel line diagram for a craftsman 32cc weed wacker?
Mine had a guide hole that broke so I took a small piece of tubing for the fuel line and glued it inside the spool for a guide to start the line, end of line goes inside the guide and wraps around spool
Need a spool cap for a task force battery operator weed whacker model 21023?
yes
What is a spool pin?
Spool pins are used on sewing machines to hold the spool of thread. Most or vertical, some that are horizontal use a spool cap to secure the spool of thread. Some machine come with spool nets to cover the spool to ensure the thread enter the machine evenly. Some machines come with an extra spool pin that fits into a small hole on the top of the machine to hold a second spool of thread.
How do you replace string on craftsman weedeater model 358.795550?
Unplug the weedeater from electrical source. Turn the weedeater upside down and remove the black knob on the bottom. If the black knob won't come off you can carefully use a large pipe wrench and turn it counter clockwise to loosen it. Be careful not to lose the slotted metal ring between the black knob and the trimmer spool. Remove the spool and clean it off. There is an arrow showing you where to insert the string. Start pushing the line into the spool going counter clock wise. Be sure to use only .065 ROUND string. Put the spool back on the spindle yellow side up. Hold the slotted metal ring with the slot facing up. Insert the string into the bottom of the ring and put the ring in the recessed circle on the spool, (yellow side). Pull the string over the slot and hold it there. Screw the black knob back onto the spindle, making sure the string is in the slot on the metal ring. Tighten the knob. You are now ready to go.
How much is a spool of tread?
A spool of thread is very cheap. Spools of thread can be as cheap as a dollar or less a spool.
When was Emma Spool created?
Emma Spool was created in 1982.
What do you call a genuine spool?
A real reel is a genuine spool.
What is spool in a sentence?
That spool is just the right size for my project.
What is the procedure for re stinging the spool on a Weed Eater Model RTE113C?
Line the mark up with the arrow and pull real hard.
