does a 2.2l has a interference head. please answer yes or no?
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.
Between the cylinder head the spark plug wire.
It is on the cylinder head near the thermostat housing.
Probably cracked head or blown head gasket or both.
I have a '98 s10 with the 2.2L 4 cylinder and auto transmission, and I average 20MPG mixed. I have never seen it over 22, and it rarely goes under 19 (this is all with mixed driving).
Initial Installation (NEW Cylinder Head) 30 Nm 22 lb ft All Subsequent Installations 15 Nm 11 lb ft
located in the block between the oil pan and cylinder head or the head itself middle way of the engine depending on the engine that ypu have
46 ft/lbs for long bolts and 43 ft/lbs for short bolts also rocker arm bolts need to be torqued at 19-22 ft/lbs
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
Yes, I believe it is on the back of the passenger side cylinder head.
how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
The 02 Chevy S10 with a 4 cylinder or a 6 cylinder does not have a timing belt.