Head bolts for a Punto 60s need to be tightened in 3 stages:
stage 1 - tighten all bolts (in the correct order!) to 30Nm.
stage 2 - tighten again, in same order as before, by turning wrench a further 90 degrees
stage 3 - repeat stage 2
what are the torque for camshaft and cylinder head bolts please
the torque spec for a 1997 cr125 cylinder head is 20ft pounds of torque.
What is the head torque specs on a 1997 Honda CRV
i need the torque setting s for the cylinder head DOHC of adaewoo cielo
torque head bolts and order ford 1997 2.0L picture if avalible please
I am not sure of the exact settings, but this site which allows you to identify torque settings through thread and size etc. may help. http://www.mechanical-fitter.co.uk/torque.htm.
cylinder head bolts---step 1 1997----33ft-lbs-------1998 through 2001---37ft-lbs-----=-2002 and later --44ft-lbs------step2--1997 through 2000---rotate an additional 90 degrees(1/4-turn)===2001 and later---rotate an additional 95- degrees===========these settings are for the 6 cylinder engines..
89 inch lbs.
i asume you know your spanners so yes it is a straight forward job. and to help you on your way the torque settings are Fiat Punto Fire engine Stage 1 30Nm/22LBf ft Stage 2 59Nm/43.5LBf ft
Agents recommend 185nm. We do 200nm.
What is the head bolt torque for a 1997 chevy lumina four cylinder?
Torque Setting for VS Commodore Harmonic Balancer Bolt- between 270-320 NM. The Best way is to check the bolt torque setting before you remove it.