0
It goes around three pulleys and is very easy. it will work fine if you guess
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is a serpentine belt diagram for a 94 Oldsmobile 88?
My 1992 Olds Delta 88 has the serpentine belt diagram on the top of the radiator
Your 88 CRX SI Alternator belt is making a strange intermittent noise shortly after changing the alternator whats wrong?
If your 88 CRX SI alternator belt is making a strange intermittent noise shortly after changing the alternator what's wrong, the belt tension could be off. Adjust the belt slightly.
Where is the crank position sensor on a 88 fiero V6?
Call autozone and they will have a diagram of where this is. also in the haynes manuel the is a location showed for you
Where is Diagram to change alternator in 88 sedan deville?
The diagram to the alternator of a 1988 Sedan Deville can be found in the cars repair manual. It can be bought at an auto part store.
Need copy of diagram to replace serpentine belt on 1998 Olds 88?
I found this information with a diagram of the serpentine belt. Hope it helps.
88 accord dx must you remove tire to change alternator belt?
sell it
How do you replace the alternator on a 1986 Oldsmobile Delta 88?
1. disconnect your battery 2. remove belt (draw diagram before removing for easy replacement) 3. remove connecting wires from the alternator 4. remove all the bolts connecting the alternator 5. put new alternator in position 6. bolt into place 7. reattach wires 8. replace belt 9. wash your hands 10. have a beer
How do you release the tension from the belt tensioner on an Olds 88 3.8 FI and what tool do you use?
Hey Duane==I think I use a wrench on the bolt that holds the pulley to the bracket for the idler. I think it is 13mm. Goodluck, Joe
How do you install 88 Dodge Aries Alternator belt?
First you will want to loosen the alternator. To do this you will need to loosen the bolt holding adjustment bolt in place. This is right under the alternator. After loosening this bolt, you can use the adjusting bolt to loosen the alternator and the belt should slide right off. Then you can put on the new belt and tighten the alternator using the adjusting bolt. After the belt is to the proper tightness, tighten the bolt directly underneath the alternator to keep the belt tight and from becoming loose.
How do you loosen a v belt on 88 voyager?
Loosen the pulley first and then the belt should loosen off the tracks., follow the diagram on the hood
What is the serpentine belt diagram for a 1997 Oldsmobile 88?
I could send a photo - email me at ken.elder@shaw.ca
95 olds delta 88 serpentine belt diagram?
I went to a Chevy dealer and they printed me a copy for my 97' delta 88. I'm sure they could do it for you.
