0
What else can I help you with?
Is there a way to configure the network so that no data collisons occur?
Data collisions occur when data is transmitted on the same medium at the same time. Therefore, to avoid data collisions, connect all hosts to a full duplex switch.
What will happen of you use all your ports in a network switch?
Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.Nothing; the switch works the same if you use all ports, or only a few.If you need to connect additional computers, you can either get a larger switch, or connect two switches between themselves.
What is the use of a straight through and cross over patch cord?
Cross over cables are used to connect devices in the same group. For Ex.. Routers,PC,Printer belongs to same group. To connect a Printer and PC, We use cross over cable. Straight through cables are used to connect devices in the different group. For Ex... Switches, Hub, Bridge are in same group. To connect a PC and a Switch, We use straigh through cable since PC and switch belongs to different group.
Why switch is data link layer?
Data link layer refers to things that happen within a single network; that's what a switch does. Only a router (or equivalent device, which I would still consider a "router") is able to connect different networks.The different networks may use the same technology (for example, Ethernet and Ethernet), or different technologies (for example, Ethernet and Wi-Fi); a switch is only able to connect parts of a single network that use the same technology (often this will be Ethernet).
What does the red wire do in the ceiling?
You connect it with the same hot wire as the black wire in the fan. It is intended to be tied to a different switch. One for the fan, and one for the light kit.
Is it possible to link a cross-over connection to a switch or hub?
A crossover cable is used to connect a Hub or Switch to another Hub or Switch - or a PC to another PC.
How can I wire a bathroom fan and light to operate on the same switch?
To wire a bathroom fan and light to operate on the same switch, you will need to connect the hot wires from both the fan and light to the hot wire coming from the switch. Then, connect the neutral wires from both the fan and light to the neutral wire coming from the switch. Finally, connect the ground wires from both the fan and light to the ground wire coming from the switch. This will allow you to control both the fan and light with a single switch.
What does TCP use to keep track of different conversations crossing a network at the same time between the same hosts?
Port numbers
Can I connect a Mac and multiple PCs on the same KVM switch?
No you cant just because it doesn't work
How can you connect between two switch without router?
connect it with a crossover cable connect both end to same type port either two gigabit port or two fast ehternet port
How do you create 5 COMPUTER network?
You need: * 5 Computers * A at least 5 ports switch * 5 adequate long CAT5 cables to connect switch and computers Connect one end of every cable to the switch. And the other ends to computers. Power up the switch. Be sure all computers are in the same WORKGROUP.
What are the elemets of computer networking?
You need computers to connect with Cabling to connect them with (such as CAT5) Device to control communications (such as a switch) All need to use the same client (Microsoft Client) Will need to be on same address scheme.
