Thanks,
Greg
I agree with your mechanic, start there. The fuel pump relay is probably starting to be intermittent. Anyway, it's a good thing to have a spare one with you. If it's solve your problem, keep the old one with you close the fuse holder maybe it's will save you a towing in the future...
The theft system problem can make starting the system difficult. It requires professional to first restore the system, enable it before starting it.
no you will not know unless you check it. and yes it will have problems starting
I am having the same problem. I never had a problem starting it before, and when I turn the key, it just makes a single "click". I thought it was the starter, but I was informed that it most likey is the battery, as it can cause "electrical-like" problems as well, which I have been experiencing. The battery may just be too weak to aid in starting the van. Before you spend a huge grip of your hard earned cash, take your battery to an auto shop to have it tested, as this is usually a free service from what I have learned.
clean wit electrical contact cleaner and let dry before reinstalling or starting motor
This is a safety precaution so that you don't inadvertently become the ground if you touch a hot circuit.
Typically, one substance needs to be out of your system before starting another. Mixing methadone while having suboxone in your system can cause instant withdrawals.
WELL U HAVE AN ELECTRICAL PROBLEM U SHOULD GET LOOKED OUT ASAP BEFORE U HAVE A FIRE.
before you started to work firts u need to plan first mostly in electrical becouse electrical works is hard to work without plan,firt plan youre team or your self how to solve the problem which is always safety and second solve the problem with your best idea
no this is not a computer problem.it is either a starter motor problem or the ring gear on flywheel is worn
The only fix is to replace it. If you are mechanicly inclined, this is a doable deal. Before you replace the sensor you should check the wiring for resistance you can use a volt/ohms meter (vom) and test the continuity of the wiring to the sensor.
The big advantage to using a test lamp is that it allows you to know if the circuit is "hot" before you work on it. All good electricians shut the circuit off before starting any work on electrical circuits.
Some of the checks that can be done to an electrical device before checking electrical resistance include the proximity of other magnetic fields and other electrical circuits. Measure electrical resistance while at a safe distance from strong electrical circuits.