do you mean like a steering wheel, and the airbag is a pump which follows out air if there's a crash.
12 inches or more.
To remove the steering wheel start by disconnecting the negative battery terminal to prevent accidental airbag deployment. Then remove the screws on the backside of the steering wheel to remove the airbag. Disconnect the airbag wiring connectors. Remove the steering column shaft nut and remove the steering wheel with a puller. Do not yank, hammer, pry the steering wheel off as this could result in steering shaft damage.
This requires special tools.To do work:Disconnect batteryGo for coffee, this is to allow the airbag deployment system to discharge.There are screws holding the steering wheel air bag to the wheel. Take them outWork carefully and disconnect the air bag wiring Do not break the connector.Remove the retaining nut on the steering shaft.Mark the wheel and shaft so it will be aligned correctly at reassembly.Use the special steering wheel puller to remove the wheelAssembly is reverse of disassemble.
There is an airbag assy on the steering wheel and one on the dashboard on passenger side. they are assy. that get replaced.
no If you've never rotated your tires and they're badly worn, or if they're unbalanced (wheel weight come off ) they can affect your steering somewhat
It is a device which both makes your steering wheel's output, "the pinion" connect with the "rack", a device which affects your front wheels forward angle. It also controls the ratio of steering wheel input to actual steering output. High performance cars will have a relatively low ratio steering ratio, meaning minor steering wheel input will dramatically affect steering output while ordinary passenger vehicles will have higher ratios requiring more steering wheel input to produce a similar amount of vehicle steering.
A person needs a steering wheel puller to remove a steering wheel. It will help remove the steering wheel by putting pressure on the middle and by pulling up on the rest of the steering wheel.
A steering wheel on a sail boat is still called a steering wheel.
You can replace a steering wheel cover by first removing the old steering wheel. Once complete, wash and dry clean the steering wheel and then apply your new steering wheel cover.
That would be the nut that holds the steering wheel to the steering shaft.
in the middle of the steering wheel.
who invented the first steering wheel