0
If you mean wooden stair treads the answer is yes. Use a good pva glue ;don't use glue that is over a year old it loses its strength with age; people don't get told this. For more info i would need the type of stair open or closed string.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Do stair tread rugs help preserve wood stairs?
Stair treads can preserve wood stairs. They protect he wood from wear and tear of everyday use. Installing stair treads can extend the beauty and life of expensive wood stairs.
Where can one buy wood stair treads in Toronto?
You can purchase wood stair treads in Toronto from the Lacasse Fine Wood Products website. Alternatively, you can also purchase these items from websites such as Kijiji.
How to Replace Stair Treads?
Removing Old Stair TreadsBefore you can replace your old stair treads, you will need to remove them. You can usually do this by using a flat metal pry bar. Place the metal bar between the stair tread and the riser. Try to raise the tread straight up. You can continuously do this until you remove the tread. However, you should be careful and make sure that you do not make any marks on the risers. You also have to watch out for the skirt or the wallboard. You might need to loosen or remove these before you can remove the stair treads. However, it may be worth a shot to try to pull out the stair treads before you touch the wallboards. After you have managed to remove the treads, you can take out the nails out of the stairs.Making the MeasurementsAfter removing the older stair treads, you should cut out a piece of wood that is the size of the piece that you just removed. If you need to make measurements, then do not hesitate to do so. You should also make sure that the wood you plan to use is the same type of wood as the stair treads. Typical stair treads are made of oak wood or maple wood. If you have a different type of wood, you should try to get something that is as close to the original as possible. This is for safety reasons. Different types of wood wear differently. This can pose as a major safety concern. For example, if one stair tread is oak and the other is maple, your stairs could give out sooner than expected. All stair treads should be as close as possible to each other. Once you have made the proper measurements and gathered the correct wood, you should sand and plane the edges so that it is as rounded as the old stair treads.Installing the TreadsBefore you begin to install the new stair treads, you should pre-drill holes into the treads. These holes will be where you actually drill the nails in place. After you have drilled the holes, you can use the matching wood filler and add your finish.
Where does one find solid wood stair treads?
Find replacement stair treads by looking first at your local big box hardware stores such as Home Depot or Lowes. By searching their websites, you might not even have to go to the stores. However, there are stores on the web and maybe even in your home town town that specialize in stair treads. Arm your self with exact measurements before beginning to look.
Stair Treads, Types and Cleaning?
For safety and beauty, stair treads are a necessity in the home. If a staircase is made of hardwood, stair treads are a smart idea to prevent any falls. The most common and popular type of stair treads are the rubber ones. Many of them have a simple horizontal bar pattern with a taper return nose that makes them fit much better. Cleaning is easy and must be done within each bar. These stair treads are mainly used in commercial locations such as offices, bowling alleys, apartments and other such locations. The treads that are used in the low cost housing are made mostly of vinyl. These are also very plain and easy to clean, however, they come in more different colors. Braided stair treads are very attractive for the home and their friction will prevent any accidents on those hardwood stairs. There are also stair treads that come in a scroll. The microfiber ones are very popular and effective. The most decorative stair treads for the home are actually made of hardwood, such as oak, and there are also stair tread carpets that look wonderful in the house. They can be very pretty and can match the furniture in the room, and also go very well with the balusters. If the balusters are white, an elegant wood stair tread would offset the white very nicely. The only disadvantage to having wooden stair treads is that they can and will take a beating. To have them looking as good as new, they can be sanded. The best way to do this is to use a belt sander. It is very important not to sand off too much of the wood. Another thing to use to finish the wood to a satin-smooth finish is a scraping tool. If you aren’t comfortable doing this yourself, a professional would be able to come in and do the job perfectly. The wooden stair treads can also be stained. This is another method that needs to be done carefully. The stain should instantly be wiped as soon as it is applied to avoid too much staining. Three coats of stain should leave the stair treads looking fabulous once again.
Can you install hardwood on a cement floor?
Yes, it must be a glue down wood or a floating wood floor.
Can stair treads be made out of pine?
Yes. There are different species of pine however. Southern yellow pine is commonly used for stair treads and is a realtively hard soft wood that has a yellowish color. It can move (shrink and cup) but is fairly resilient. Eastern white pine is more stable, but is much softer. It is used when a worn country look is desired.
Making Stair Treads Safer?
Stair treads can be hazardous if the stairs are located in a dimly lit hallway or they do not have any alternating colors so that people can see how deep the treads are. There are some things you can do to increase the safety levels of the stair treads in your home or office. Carpet Runners for Stairs The most common way to make stair treads safer is to install carpet runners along the stairs. The carpet can be as wide as the stairway, or it can be a narrower strip of fabric that leaves some of the original stair showing on either side. When a carpet runner is placed along the most used part of a stairway, people are able to maintain their footing more easily. Carpet runners also make it easier to see where each step begins and ends, which eliminates tripping from misjudged steps. Different Materials for Added Safety Depending on the environment your stair treads are in, you may want to find carpet runners that are made from material other than traditional carpeting. If the stairs are right inside the front door, people may have slippery mud or water on their shoes when they begin to go up the stairs. You can use carpet runners that are made from tightly woven carpet or indoor/outdoor carpeting to help give the stairs more grip on people’s shoes. Carpet runners for office buildings are sometimes made from rubber flooring material to provide an extra layer of safety for people who are coming in from out of doors. Painted Stair Treads Stair treads can be difficult to navigate in dim lighting when they are all the same color. One of the best ways to reduce the danger of people missing a step and falling is to paint the top of the stair tread a different color than the side. This makes it easy for anyone to see where the stair treads are at a glance. Painting the stair treads alternating colors can also be an interesting way to make your stairs look more creative and give them some personality. If you prefer, you can use different colors of wood or paneling to achieve the same impact.
Can you glue wood flooring to concrete subfloor?
I would not. The wood has to expand and contract with temp changes. Your floor will buckle if you do.
What kind of glue is used to glue wood?
Pva wood glue
What is a stringer in terms of outdoor wood stairs?
They are the side members that the treads are fastened to, sometimes notched out to receive the treads.
Is it good to put wood floors on top of tile?
You can put the newer style floating wood floors onto a floor with tile. Also, if it is old VCT tile, there are glues that will allow you to use their product to glue the wood to the floor. Unfortunately, nail down wood is not acceptable.
