0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is basecoat nail polish?
It is a coat that is clear before they put the polish on.
How do you make DuPont 3 stage auto paint darker after painting the clear coat?
basically you can't...never apply clear until your'e 100% happy with the basecoat. only remedy is a re-application of the basecoat.
What is a basecoat?
A basecoat is the undermost coat of paint over which subsequent layers can be applied.
How much paint is required for full body paint on a 38 foot motorhome?
I just finished repainting my 1995 Monaco Dynasty, 36'. It had finish problems, so after sanding, including epoxy primers, basecoat primers, basecoat paint and urethane clear coats, the total 'paint' used was about 12 gallons.
Do you sand between your base coat and clear?
That depends on whether the basecoat is a solid colour or a metallic. Metallic basecoats are not sanded before applying clear. Sanding it will destroy its reflective properties and give it a patchy appearence. It must be applied evenly in three coats, followed by a final ''control coat'', where the gun is moved further away , and the speed of the passes is increased. When the basecoat is touch-dry (5-10 min.) wipe over it lightly with a tack-cloth to remove any loose metalflake particles, before the clear is applied. Clearcoat is optional on a solid-colour basecoat, and if necessary, it may be allowed to dry overnight and sanded with 800-1200 grit before applying clearcoat. Semi Metallic and "pearl coats" when properly applied should not need the "mist coat" and the clear should be applied as soon as the flash off time has passed. 5-10 minutes is usually not enough for "touch dry" unless it is in a climate controlled booth. And you do not want to add clear if the base coat IS touch dry. It will cause frosting or a glaze. Always read the instructions that come with the base coat and clear coats. If you want to sand before the clear coats, you need to wait at least 48 hours than put another wet coat of basecoe on before clear.
How do paint mixers make different colored paint?
By adding different color pigments into a neutral basecoat
Can you use latex paint as a basecoat for outside plywood projects?
You can, but I believe oil based primer would be better.
What if your fingernails are yellow after you wore a blue nailpolish What do you do?
they are just stained, it'll wear off in a couple of days. (don't use it again)Well my fingernails are yellow from using too much nailpolish, but I usually use light colors which doesn't cause as much stain as like dark blues, in your case. If you want to use it again, just put a basecoat on underneath, and that's exactly the basecoat's purpose, to prevent nailpolish from staining your nails. Now I wear the basecoat, and put more nailpolish on to hide the yellow until it grows out. Growing out could take a month
What is better polyurethane or urethane in automobile paint?
All modern automotive refinishing systems are urethane based. Basecoat clearcoat is the most common, but there are still single stage products being used. As long as the top coat(either clear or single stage) is catalyst or hardener to cure,the finish will be durable. Polyurethane is for protecting your hardwood floors.
Does harlequin paint come in a aerosol can?
I have'nt seen it in a aerosol, but you may find it an a up- market auto accesories store, but many paint suppliers will mix basecoat in any colour code , and use a special machine to put it into an aerosol can.
Can you clear coat over primer and not use a color coat when painting a vehicle?
Though it is possible to get clear coat to adhere to primer, there are a couple of reasons this is a bad idea. The first and foremost reason is that the primers main job is corrosion protection, coupled with a chemical and mechanical foundation coat for basecoat or color coat in a single stage system, it is not designed to be clear coated. The chemical bond between primer and clear coat would be very weak. Base coat paints have modifications in the resins to allow them to adhere to the primers, and still give the clear coat the proper foundation for it to adhere to, while flowing out in the wet look finish it is designed to have. Also, most of the primer jobs you see running around will have sun faded areas, as well as bleaching in short order. If you want the flat primer look, but have a job that will last, prime the vehicle, base coat it in the gray color you want, but clear coat it with one of the prepackage flat clear coats that are available. The resulting job looks like it is "just primer" but has all the chemical and physical protection of a traditional clear coat job, just not the gloss.
What is rhino lite?
Rhinolite gypsum plaster is a combined basecoat and finishing plaster for internal application onto brickwork, concrete blocks, concrete and Rhinoboard. It is also a finishing plaster for sand and cement basecoats. There is some controversy over using Rhinolite in the building community.
