It is best to remove the torque converter to change a gear box on a Nissan. This will help there to be a smoother time adjusting the gear box.
You have to remove the transmission to replace the torque converter.You have to remove the transmission to replace the torque converter.
After you have removed the cover from the lower half of the torque converter housing and driveplate you can remove the four bolts that secure the torque converter to the driveplate. Remove them one at a time by rotating the engine so that each bolt comes into view at the bottom where you have removed the driveplate cover.
remove the transmission and torque converter. Remove the bolts from the pump (front of transmission case) and remove the pump.
You can either pull the trans or pull the engine. Your choice, But you must do 1 or the other to get to the converter.
The torque converter is located between the engine output shaft and the transmission. Have to drop transmission to remove.
You will have to remove the transmission and torque converter from the car to get to the front seal.
Torque converters cannot be serviced as they are welded together, the only way to fix them is to remove the transmission and torque converter and replace the torque converter.
You need to separate engine and transmission. Then torque converter just pulls of tranny.
Torque converter clutch? Remove transmission Replace Torque converter Reinstall
Between the engine and transmission.
A lot more work than it is worth, you will need to change the brake pedal, Remove the clutch pedal, master cylinder and slave, trans mounts may be different, center console, flexplate and torque converter
automatic? remove transmission and torque converter then remove flexplate (auto has a flexplate not a flywheel if mauel transmission remove gear box and clutch then remove flywheel