Want this question answered?
You have to get the whole back glass, the seal is attached to the glass and that is the way it comes.
After you have tiled, normally you will add the bonding liquid or sealant to the grout mixture. however there are liquids on the market that you can spray onto the tiles to seal the grout, however this is a temporary and not a recommended idea. It is better to scrap all the old grout out and re-grout with the proper mixture
if your grout had not been seal then it will be hard to clean and if you clean with acid the grout will be change color.
Tile has a glass finish & doesnt need wax, Wax can cause a slip & fall hazard when it gets wet Sealing tile is a misnomer, you really only need to seal the GROUT.. stop by the Depot & get some grout sealer, better for the grout
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
You can try to clean it with bleach or a special grout cleaner. White grout tends to turn yellow with time. You may want to dig out some of the grout and put new over it. Then be sure to seal the grout - an ongoing process.
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
vinyl is impervious to liquid and does not need any sealing.
You put the seal on the glass then put the window in the frame. This eliminates the pressure on the glass. IT is easier to run a glazing tool around the metal frame without damage than it is to run it around the glass.
Use a high-quality sealant and its specifications depending upon the requirement would be the best solution for the slate tile before grout.
if you mean dry enough to seal, most grout companies suggest about 20 to 30 days. most grout will dry enough to walk on in a day
Yes. If it is a ceramic or porcelain tile you only need to seal the grout. If you have a natural stone or quarry you need to seal the tile and the grout. Generally when you install natural stone, you seal the tile before you grout. Otherwise the colorant in the grout will seep into the tile. If the floor is existing you would seal it all at once. Don't forget to use a stripper to remove any old sealer. Make sure the stripper is acceptable for the type of flooring you are sealing. Stone can be very delicate and damage easily. Vinegar can etch marble, granite, and travertine. One last note, you get what you pay for with sealer. Invest in a good sealer and you will get much better, much longer results.