Yes you do. The tool is sold at Autozone and is called a brake caliper tool. It looks like a metal box frame with tabs sticking off of it. You will use the tool to turn the caliper piston clockwise back into the piston. It is mounted on an internal screw. I found this out firsthand when I couldn't compress the piston with my c-clamp like most brake jobs I've done in the past and ultimately had to buy a rebuilt caliper.
There is a special tool but it is not needed. All you need is a large flat head screw driver. You will be able to rotate the piston by placing the flat head screw driver into 1 of the slots and turning it. The special tool fits all 4 slots to rotate the piston so your pads can clear the rotor but a screw driver will work just fine. This is what I did to complete my rear brake job.
The 2001-2006 Acura MDX has a special dealer-only rear wiper blade. Since you have to go to the dealer for the part, ask them for the procedure.
nope
To replace the back speakers in a 2006 Acura TL, remove the SRS housing on both sides and the back panel of the speakers. Remove all wiring attached to the speakers and replace.
No, but you do need a special tool to compress the brake cylinder. Auto parts stores loan them for free with about a 30 dollar deposit
remove old brake pads, replace with new brake pads voila!
Go to the Dealer!!!
See below article-
Replacing Brake PadsThis will depend on the vehicle. Try asking a more specific question. brake pds 2006 1500
The 2006 Acura TL has 24 valves.
The 2006 Acura TSX has 16 valves.
The 2006 Acura MDX has a V6 engine.
The 2006 Acura TL has a V6 engine.