Want this question answered?
I used a 21mm on mine yesterday. hope this helps Paul
you will need a 14mm socket for the drain plug & a special oil fliter cup socket for the oil fliter. the oil filter cup socket is available from most auto parts stores or your local Toyta dealership.
You will need a 35 mm socket.
You can use a 11 centimeter socket to remove the transmission drain plug. The socket should be a five-point socket.
The drain and fill plugs need a 17mm allen wrench. There are some VW parts houses online that sell a special transmission drain/fill plug socket: it's a 17mm socket with about an inch of 17mm allen wrench stock welded into it.
You need a peugeot kit, that includes a new ECU. This then needs coding into the vehicles BSI, which can only be done by a dealer.
my 99 was located rite above the oil filter. you will need to take the filter off after drain the oil of course and get a special socket to fit it. your local auto parts store can get the rite socket for you.
You need a 9/16" box end wrench for the drain plug. The filter requires a special socket to remove the cap. I used to use a 1 1/4" open end wrench until I bought the socket from Snap-On.
nope
I have a 96 Camry and the drain plug is metric - I believe it is 14mm. You will need a socket or wrench of the appropriate metric size.
I have a 92 Diamante Wagon. And the drain plug on my car is on the bottom left (driver side). You need a 22mm socket wrench to open it. Hope that helps.
on the front of engine to the right of the alternator , your looking for a dome shape plastic cap with a nut on top.You need a 27mm socket