Want this question answered?
Yo can not "change" an engine code. You need to repair what is causing the code.Yo can not "change" an engine code. You need to repair what is causing the code.
To change the clutch you need to remove the engine, the transmission or both. The clutch is BEWEEN the engine and transmission and you can't get it off without separating them.
http://www.techcapri.com/Repair/Capri_Service_Manual.htmthis link will give you all of the information you will need
you don't need to raise the car off the engine cradle at all to change the clutch. i did the whole thing in my driveway
You have to remove the engine and gearbox. you will need a engine crane. Once you have the engine and box out, remove gearbox from engine and replace clutch, Refit gearbox to engine, put engine and gearbox back in car. Easy job if you have access to a engine crane.
The gearbox will physically fit, you need to change the clutch to a push type clutch however. If we are talking 5 speed gearboxes.
Usually by replacing the clutch. The clutch and fan are actually separate pieces and unbolt form the water pump shaft (if it's a orward-mounted engine). They usually are not a consumer-servicable part and need to go back to a manufacturer for rebuilding. GOOD LUCK!
no
you need to suspend the body best on a 2 poster ramp/lift , then remove the subframe and suspension rack etc, hold engine on a engine crane.
The springs around the clutch plate have probably came out and locked up between the pressure plate and the clutch plate and locked them together. you need to change the clutch plate and have the pressure plate checked for damage.
you need a clutch that's all
It will have a centrifugal clutch by the engine, you do not need to control it, it engages at a curtain rpm.