0
Yes. You want to make sure they are put back in the same location and in the same orientation. They may look alike, but understand that the main caps were "align bored" to make a straight path for the crankshaft to ride. There could be a couple thousandths of an inch difference between two adjacent main caps, so you should definitely put them back where they came from.
What else can I help you with?
Do main bearing caps need to go back in the same place they come from?
yes
How do you set torque of main bearing caps on 79 Chevy Malibu?
Need to know the engine size.
How do you replace the rear oil seal on a Chevy c-10?
1987 and newer requires removing transmission and flywheel to gain access to the rear main seal. The seal is one piece and easy to replace once you gain access to it. 1986 and older requires removing the engine oil pan, oil pump, loosen all main bearing caps, remove rear main bearing cap, replace upper and lower halfs of seal. The upper half is tricky but it can be done. All bearing caps would need to be torqued to specs for assembly. I would suggest purchasing a shop manual for that vehicle if you decide to do the job yourself.
What are torque specs for vortec lower intake and main caps?
Need to know the year and engine size to answer your question. SORRY.
How do you change rear main oil seal on 2000 Chrysler sebring 2.5 engine without removing oil pan?
The rear main is accessed by removing the trans and flywheel. There is no need to remove the oil pan.
Need of 33pf caps with crystal?
The main intension is to eleminate high noice frequency which was jenarated by crystal. Regards, Narayana Reddy
Can you change the rear main seal on a 83 ford f 150 by dropping the transmition?
Not really, you need to drop the oil pan to get to the rear main. You may be able to install a new seal by dropping the cap for the rear main. You may have to loosen all the main caps and pull the crank down just a bit. Install the seal and re-torque the main caps.
How do you install a distributor in a 1996 Yukon?
I removed the distributor in my 96 gmc yukon but I forgot to mark it before removing it.What do I need to do to get it back in.
Do you use capitals for mum and dad?
If you say my mum or dad... you don't need caps. if you are saying mum and dad... then you don't need caps.
How many bottle caps do you need for festus on fallout las Vegas?
You need 50 Sarsaparilla Star Caps to proceed to the next part of the quest.
How do you replace bearing caps on a 350 are they all the same i lost a bearing cap can i use any bearing cap from any 350?
You can purchase new or used bearing caps, but there is machine work required. If you are talking about main bearing caps, the block will need to be line bored with the new cap in place. If you're talking about a connecting rod bearing cap, the rod will need to be resized with the new bearing cap in place.
Can you reuse your crankshaft after breaking the main caps?
If you are working on your main caps, then you are in an engine rebuilding situation. If they actually broke, you need to find out why, and replace or repair the parts, including the crankshaft, that are bad. If, by breaking, you simply mean that you loosened the bolts, you still need to evaluate the status of the crankshaft and bearings. This involves checking for size, remachining as necessary, replacing parts as necessary, checking bearing clearance, and torquing the cap bolts to specification.
