answersLogoWhite

0


Best Answer

yes

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Do you put brake fluid in both sides of master cylinder 1978 Chevy truck?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is a Chevy Impala 2004 brake fluid sensor located?

In the master break cylinder


Where to add clutch fluid in 1988 F 250?

The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.


Where is brake fluid in 2000 Chevy Tracker?

Master cylinder mounted on the firewall, drivers side.


Where is the master cylinder on a Volkswagen golf?

Look to see where you fill the brake fluid and where your filling the brake fluid that is the master cylinder.


Where to put brake fluid in Chevy Cavalier?

In a Chevy Cavalier, you put the brake fluid in the brake fluid reservoir located atop the master cylinder. You can find this under the hood, on the drivers side, near the back firewall on top.


How do you know when you need a new master brake cylinder?

A brake master cylinder? If you are losing brakes or brake fluid.


Where in a 1987 Chevy Celebrity do you put brake fluid?

Master cylinder. Mounted on the firewall, driver's side.


If you make a mistake and put motor oil into your brake fluid could you lose your brakes and how long would it take to go through the system before you have no brakes.?

Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.


What kind of fluid do you use in a Chevy s-10 master cylinder?

Any brand of brake fluid will be fine. as long as it is DOT3


What kind of fluid is in 300zx clutch?

There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder


Where do you fill the brake fluid?

master cylinder


Where is 1995 escort clutch fluid located?

The clutch gets its fluid from the master brake cylinder reservoir. The master clutch cylinder sits just below the master brake cylinder reservoir and is fed fluid by gravity.