Not necessary. Just scuff it up so that there is a good surface for the new paint to stick to, remember to fully sand any chips or body repair because new paint won't hide old blemishes, it just makes them shiny.
You can now get a lens polishing kit at an auto store, like auto zone.The fogginess of your car's lens is actually a clear coat that is applied to the plastic, to retard the UV rays from damaging the plastic. Once that clear coat is burnt from the solar rays, it becomes foggy.Polishing your lenses will remove this old coat and you will need to apply a new coat. The kits available have all the materials you need to fix it. It will not be as good as nes, but the improvement will be noticeable. You do not have to remove your lights. quote taken from yahoo answers
Though it is possible to get clear coat to adhere to primer, there are a couple of reasons this is a bad idea. The first and foremost reason is that the primers main job is corrosion protection, coupled with a chemical and mechanical foundation coat for basecoat or color coat in a single stage system, it is not designed to be clear coated. The chemical bond between primer and clear coat would be very weak. Base coat paints have modifications in the resins to allow them to adhere to the primers, and still give the clear coat the proper foundation for it to adhere to, while flowing out in the wet look finish it is designed to have. Also, most of the primer jobs you see running around will have sun faded areas, as well as bleaching in short order. If you want the flat primer look, but have a job that will last, prime the vehicle, base coat it in the gray color you want, but clear coat it with one of the prepackage flat clear coats that are available. The resulting job looks like it is "just primer" but has all the chemical and physical protection of a traditional clear coat job, just not the gloss.
No it will cause big problems. You should sand down to paint before adding a new coat of clearcoatAnswer: There is nothing wrong with putting a new coat of clear over old, as long as it is well sanded , and the underlying clearcoat is in sound condition. It is necessary to do it when spot- repairing a clear -over- base metallic paintjob.
remove it, reinstall it. They are all different, Be Clear.
Try using WD-40, or ZOUT (created by nurses to remove bloodstains). Do not dry the coat until the stain is removed. If all else fails, most dry cleaner fluids will reomve the stain. Or it may just be time for a new coat!
There are a couple of ways to go about removing wax from your car. 1. Wash the vehicle with a suitable wash such as P21s Total Auto Wash 2. Clay the vehicle with detailers clay* *This has been known not to completely remove tough waxes such as Collinite. 3. Use an AIO (all in one) cleaner Use an automotive safe wax & grease remover. Will remove the wax and not harm the clear or paint.
Yes. We use oil primer on all our out door projects. Not sure why you would want to though. If I was going to put another coat on, why would it be clear? You should just put another coat of whatever color is up there now.
Clear-cut
If sand it you will sand all of the paint of not just the clear part.
Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.Use the Edit menu and the Clear command to clear all formatting. You could also use the Paint Format tool and paste from a plain cell onto the cell you want to remove formatting from.
clear all
It clears all snaps sent to you by your snapchat friends. It does not remove your contacts!