It has a flasher relay for the signals only.
www.fixitnow.com
No brake lights but turn signals work? Turn signal switch brakes route through it.
turn signal switch needs replaced!
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs
Retaining ring from the top of your 1979 Chevrolet Scottsdale ignition switch. Slide the switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
it is most likely a fuse or at worst the turn signals and stop lights work through the turnsignal switch
It could be the brake light switch (the switch that activates the brake lights when you step on the brake pedal) has gone bad
turn signals work butt the brake lights dont can anyone help please? cant afford a mechanic.
if the tail lights work but not brake lights then its most likely just a blown fuse or it could be the switch at the top of your brake pedal arm.
May possibly be in the multifuction switch on the left of the steering column!!!!
It is your multifunction switch that has gone out. It is located in the steering column. I used my emergency lights and it blew out brake lights, turn signals, and emergency lights. In newer models Chevy did a recall not so for our older models. Mine is a 1995.
Rear loom ground not contacting. Bulbs burned out or missing. Brake light switch or connection to it is fubared.