Yes, if you have the small block bell housing.
As long as the 302 is from a similar year it will bolt right in. The only difference between the 289 and 302 is the 302 has a slightly longer stroke.
Sorry, no.
in the tranny. You can get to it from under truck. look for a plug with wires. Unplug it, take out the retainer bolt, remove the sensor. Take off the gear and put on new sensor
The Ford 302 engine will not bolt to the 300 six-cylinder bell housing. A new bell housing or a Bell housing modification kit will need to be used.
no a 258 amc and ford 302 have same bolt pattern
if you change the bell housing
Ford calls their 302 cubic inch V8 a 5.0
.044 inch in a 1979 Ford truck 302
The 302 is alredy balanced. You do need to install a piolet berring in the rear of the crankshaft.
If your talking about the 400(m) style motor then no it won't. The 400 has the "big block" bolt pattern, you would need a 4 sp from a big block motor to fit.
yes it will bol up if its the same trans as the f150 6 cylinder but you need the clutch and pressure plate for the v8
The C4 will bolt up to the 302 with the correct bell housing.