only if you want to stop
Replace the brake line, bleed the brake. top up with brake fluid. Done.
replace brake line the damage to the line or if the jb weld gets into the line it will affect how the system works.
A brake line may be broken missing or loose.
If you have a power brake booster then there will be a vaccum line that runs to the brake booster on the firewall from the carburator. Check the booster for holes and broken fittings or buy a new booster. if no brake booster then brakes shouldn't affect vaccum
Loose connection? Stripped fitting (cross threaded or overtightened) Broken brake line?
You first need to tell us what exactly is broken.
You have to change the line, too much pressure to do anything else.
More than likely, there is air in the brake line or a leak in the line. Go to a mechanic and have the brakes "bled". He'll know what you are talking about. It's fairly inexpensive to do. Bad brakes, bad master cylinder, broken brake line, low brake fluid.
I had that problem and it turns out that my brake line was broken. It cost 50 bucks to repair...
it would be brake line ,if it pulls to right it would be the left one,if it pullss the left it is right one.sames to the caliber.
There is no safe way to repair a broken or leaking brake line. The line or tubing that is leaking must be replaced or a new piece of tube, spliced into the line with fittings, to replace the leaking area.
Check Your local parts Store or dealer For Price Info.....:)