Yes. You should consult your doctor for clearance. The virus, which causes cold in one person can kill other people.
boil
Intake clearance COLD: 0.006-0.010 in. (0.15-0.25mm), Exhaust clearance COLD: 0.008-0.012 in. (0.20-0.30mm), Intake clearance HOT: 0.008-0.012 in. (0.20-0.30mm), Exhaust clearance HOT: 0.010-0.014 in. (0.26-0.36mm).
When ur hot and ur working then it is hot working, if ur cold and ur working then it is cold working
THE VALVE CLEARANCE ON THE 90 TRX300 IS 6/1000 COLD FOR BOTH INLET AND EXHAUST.
0.008intake 0.009exhaust
Straight out of the original 1978 Manual: Intake Valve Clearance - Cold: 0.18mm or 0.007" Intake Valve Clearance - Hot: 0.20mm or 0.008" Exhaust Valve Clearance - Cold: 0.30mm or 0.012" Exhaust Valve Clearance - Hot: 0.33mm or 0.013" The manual states these specs are not the same for the 2T-G motor, only the 2T-C
Intake valves - 0.20mm (Cold) Exhaust valves - 0.30mm (Cold)
It is 0.40mm "Valve clearance (at cold) Intake mm(in.) 0.40 (0.0157) Exhaust mm(in.) 0.40 (0.0157)
.003 in .005 ex cold
Robert Oppenheimer.
.07mm or .003 inches cold.
Cold setting is .15MM or .006 in.