•Redox reactions can cause a change in volume •2Fe + 1.5 O2 > Fe2O3
Volume is a physical quantity not a change. However CHANGE in volume is a physical change.
U= vol metric integral1/2(stress* strain)dxdydz
heat strain or the thermal strain is caused due to the temperature changes. A solid body expands as the temperature increases and contracts as the temperature decreases.this causes the thermal strain. for a homogeneous and isotropic body the thermal strain is caused by change in temperature. thermal strain = coefficient of linear thermal expansion * change in temperature where the coefficient of linear thermal expansion gives the strain per degree of temperature.
any increase in temperature will cause gas to occupy a larger volume, any decrease will shrink the volume to a point it becomes liquid. further decrease will cause a solid to form. at -273 degrees celsius everything is solid
Strain is dimensionless quantity because strain is the ratio of the same quantities like change in length/original length,,change in volume/original volume. e.g tensile strain=(change in length)/(original length)=m/m (S.I unit) so its a dimensionless quantity.
Volumetric strain of a deformed body is defined as the ratio of the change in volume of the body to the deformation to its original volume. If V is the original volum and dV the change in volume occurred due to the deformation, the volumetric strain ev induced is given by ev =dV/V Consider a uniform rectangular bar of length l, breadth b and depth d as shown in figure. Its volume V is given by, This means that volumetric strain of a deformed body is the sum of the linear strains in three mutually perpendicular directions.
is defined as ratio of uniform stress to volume strain
Volumetric strain of a deformed body is defined as the ratio of the change in volume of the body to the deformation to its original volume. If V is the original volum and dV the change in volume occurred due to the deformation, the volumetric strain ev induced is given by ev =dV/V Consider a uniform rectangular bar of length l, breadth b and depth d as shown in figure. Its volume V is given by, This means that volumetric strain of a deformed body is the sum of the linear strains in three mutually perpendicular directions.
In general, yes, but lots of things may cause its volume to change. The volume will change if temperature or pressure change, or if something dissolves in the water. Volume may also decrease by evaporation.
A greater volume of water would cause this.
volume is the measurement of the amount of space that an object takes up.
* a device that responds to mechanical strain. with a small change in resistance. ... * device for determining the amount of strain (change in dimensions) when a stress is applied
Stress is the load per unit area acting within a material. It can be thought of as the internal resistive response of a material to an externally applied pressure.Strain is the change in shape of an object in response to external pressure or internal stress. To complicate matters, strain causes the transmission of stress through an object (as in simple terms the strain causes an internal "movement" causing one part of the inside of an object to press against the material next to it generating stress in this region, this in turn can cause more strain and so on!).There are a number of differing types of strain, for example axial strain is defined as the change in length relative to the original length of an object (e.g. a steel wire being stretched). This change in shape is also called deformation. Volumetric strain occurs when an object is squashed or pulled on all sides leading to a change in volume.
•Redox reactions can cause a change in volume •2Fe + 1.5 O2 > Fe2O3
strain = change in dimensions/area strain is of 3 types 1)linear 2)aerial 3)volumetric
Percentage change in volume= Change in volume/intial volume X 100