No, just a cam position sensor in the distributor.
A Plymouth Voyager does not have a maf sensor.
code 41 -1993 Plymouth voyager - Alternator Circuit
Yes it is on passenger side on back side of the intake manifold
It is on the throttle body opposite of where the cables attach.
not if you are mechanically incl. its on the trans bell housing near the motor on the backside of the trans. its probably easier to get to by going through the bottom of the vehicle by jacking it up and putting it on stands.
A 1993 Plymouth Voyager does not have a cabin filter.
Follow the upper radiator hose to the engine. Look for a two wire sensor behind the thermostat housing and under the coil. That is it.
The sensor in the distributor is the crankshaft position sensor.
a voyager doesn't use an inertia switch
20 gallons.
You can find a vacuum line diagram for a 1993 Plymouth Voyager in the owner's manual. You can also find it at various auto stores.
The towing capacity for the 1993 Plymouth Voyager is about 2000 pounds. This varies somewhat depending on the model purchased.