Yes it does, odds are it's probably frozen.
brake caliper bushings are the rubber mounts that sit inside the caliper bolt holes. They help guide the bolts when bolting the caliper up to the caliper bracket.
yes they are different
Rear caliper to rear caliper bracket bolts, 32 ft. lbs.
1. Remove the brake hose to caliper bolt from the brake caliper. 2. Remove the brake hose from the brake caliper. 3. Remove and discard the 2 copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end. 4. Cap or plug the opening in the brake caliper and the brake hose to prevent fluid loss and contamination. 5. Remove the 2 brake caliper pin bolts. Remove the park brake cable from the caliper. 6. Remove the brake caliper from the brake caliper bracket.
e brake
Assuming this is a 4+4 vehicle, the caliper bolts on to the caliper bracket. The caliper bracket bolts on to the steering knuckle.
You usually have to take off the brake caliper, then the caliper mounting bracket to free the rotor.
Try about 25 lb. ft. for the caliper bracket.
Remove the wheel, remove the brake caliper and the caliper adapter bracket, pull the rotor off of the wheel studs.
check for loose caliper bolts, brake pad may be moving around in caliper or caliper bracket. missing or broken brake hardware.
it's called a caliper bracket
Front caliper bolts 25 ft/lb Mounting bracket bolts 80ft/lb