0
usually a sagging door on a Chevrolet truck is due to worn out bushings, pins or other small and replaceable hardware that hold the joints together. These moving parts bear a good amount of stress and weight but it is very difficult to get any lubrication into them because they are small and tight. New bushings and pins (you need two sets for a door - one for each hinge) are usually about $8-$10 each set (one set of bushings and a pin for one hinge)
this guy has specialty bushings that you can lubricate to prevent your new bushings and pins from being worn down. His site also has diagrams from the GM manual for their procedure on how dealerships should repair this problem
http://www.andyz28.com/truck/
GM diagrams at http://www.andyz28.com/3rdGen/gmmanual.HTML
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How many passengers can fit in a 1994 Chevrolet Tahoe?
3-door truck - 5 pass. 5-door truck - 7 pass.
How many blend door actuator do a 2005 Chevrolet Silverado have-?
There are usually only 1 blend door on a truck. This also goes for a 2005 Chevrolet Sliverado.
2003 Chevrolet truck door panel removal?
2003 Chevy silverado door panel removal diagram
How much does a 1986 Chevrolet 3500 Pickup Truck weigh?
Look on the inside of the door there is a small sticker that will have the truck weight!
What causes a door to sag on a 1993 Chevy silverado?
the upper door hinge is worn letting the door sag. if u are lucky the pin will wear instead of the hinge part on the door. more than likely the hole on the hinge is worn. i had the same problem on a truck of mine. had to put aspot of weld on the hole where it was worn to tighten it up .works fine now
How do you stick the door windows of a 1966 Chevrolet truck to the track?
You need to remove the vent window assembly to remove and replace the door glass
When was the first four door truck made?
Chevrolet made its first four door pickup in the 1973 model year. It was a variation of the C20 series.
What is the gross vehicle weight of a 1991 Chevrolet cheyenne truck?
This can be found on a placard located on the driver's door jam.
Will a 1972 Chevrolet truck grill fit on a 1968 Chevrolet truck?
No. But 1969 thru 1972 Chevrolet truck grille assembly will interchange.
Why won't the driver side door open from inside on 1997 Chevrolet Truck?
Bar from the handle to the latch is broken or disconnected.
How can I adjust a 97 Tahoe rear door?
I need more details for your question. I will assume that you have door sag..Do you have door sag? If you do, you need new door pins... This is not an easy job you will need a hoist to hold the door while you are working on it. Or if you can find a freakishly strong friend to hold the door for you then that will work to.
Ecm location 2002 Chevrolet 2500 truck?
location of ecm 2002 Chevrolet 2500 truck
