0
Explain the function of each part of the double housing planner?
Wiki User
∙ 11y ago
PLANER MACHINE
Introduction: The planer is a machine tool designed to produce plane and flat surface on a workpiece which is too large or too heavy. The workpiece is securely fixed on a table called platen, and it reciprocates horizontally against a single edged cutting tool. The surface machined may be horizontal, vertical or at an angle.
Operations of planer machine: The planer is used for:
1. Planing flat horizontal, vertical and curved surfaces.
2. Planing at an angle and machining dovetails.
3. Planing slots and grooves.
The planer are available in different types for doing different types and sizes of job; the most common being the standard and double housing planer.
Construction: The main parts of the double Housing Planer machine is Bed and table, Housings, Cross rail, , Tool heads, Driving and feed mechanism.
Bed and table: The bed is a long heavy base and table made of cast iron. Its top surface is flat and machined accurately. The flat top surface has slots in which the workpiece can be securely clamped. The workpiece needs rigid fixing so that it does not shift out of its position. The standard clamping devices used on planer machine are: Heavy duty vice, T-holders and clamps, angle plate, planer jack, step blocks and stop. The table movement may be actuated by a variable speed drive through a rack and pinion arrangement, or a hydraulic system.
Housings: The housings are the rigid and upright column like castings. These are located near the centre on each side of the base.
Cross rail: The cross rail is a horizontal member supported on the machined ways of the upright columns. Guide ways are provided on vertical face of each column and that enables up and vertical movement of the cross rail. The vertical movement of the cross rail allows to accommodate workpiece of different heights. Since the cross rail is supported at both the ends, this type of planer machine is rigid in construction.
Tool heads: Generally two tool heads are mounted in the horizontal cross rail and one on each of the vertical housing. Tool heads may be swiveled so that angular cuts can be made.
Driving and feed mechanism: The tool heads may be fed either by hand or by power in crosswise or vertical direction. The motor drive is usually at one side of the planer near the centre and drive mechanism is located under the table.
The size of the planer is specified by the maximum length of the stroke, and also by the size of the largest rectangular solid that can be machined on it.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is double hashing in data structure?
if collision is occurred in hash function then we can solve this problem by using double hash function
How would you write a function prototype for a function named calcAreaReact that accepts two arguments width and length and returns the area.?
double calcAreaRect (double a, double b);
What is function Explain the user define function with example?
Function is a logically grouped piece of code allowing perform certain types of operations. Function can return value (int, double etc) or be void type - meaning they do not return value. Functions allow to make code cleaner by moving out chunks of code of main body. For instance you want to write a function that finds area of rectangular. #include <iostream> using std cin; using std cout; using std endl; using std get; int main() { double sideA = 0.0; cout << "Enter side a of rectagular: "; cin >> sideA; double sideB = 0.0; cout << endl << "Enter side b of rectangular: "; cin >> sideB; //This part passes sides a and b to user defined function "Square" cout << endl << "Area of rectangular is: " << Square(a, b); cin.get(); return 0; } //definition of user defined function Square double Square(double a, double b) { return (a * b); }
When is a function executed and where should a function prototype and function definition appear in a source program?
If you want to use prototype it has to be declared before main(). If you have a function of type double with one argument of type int (with name arg), and the function name is func, then we have:#include ...double func(int arg);...int main(...){...return 0;}...double func(int arg){...}
How do you use pow function in c?
Either you can use the pre defined function "pow" in the <math.h> header file OR you can make a user defined function to do the same operation. 1.Using the pre defined function in <math.h> : The function is a of datatype double and accepts only values in double. So, prototype declaration is: double pow(double x,double y); Pass the values to the function and it'll return the value of xy. In the calling function it can be declared as: double power=pow(x,y); 2.USER DEFINED FUNCTION: double power(double x,int y); int main() { double x,result; int y; cout<<"\nEnter the base: "<<; cin>>x; cout<<"\nEnter the exponential power: "; cin>>y; result=power(x,y); cout<<"The result of x to the power y is: "<<result; return 0; } double power(double x,int y) { for(int i=0;i<=y;i++) { x*=x; } return x; }
According to Ralph the fire serves a double function explain both?
GuCCi MaNe
Explain use of pow in c language?
The general form of the pow function is: double pow(double base, double exp); Which returns the value of baseexp This function may be overloaded to allow for different parameter and return types, but the basic function is the same.
Is a planner a double consonant?
yes it has two n's together
Is planner a double consonant word?
yes it has two n's together
Explain what determines protein confirmation and why it is important?
Environment and bonding. The structure determines its function.
What kind of a bus transit service is the OC Transpo?
OC Transpo is public transit in Canada's capital. There is Travel Planners, Quick Planner, Advanced Travel Planner. The buses are new double-decker buses.
How do you write a c program to find area of rectangle using function?
There will be a function in it like this: double RectangleArea (double a, double b) { return a*b; }
What is double hashing in data structure?
if collision is occurred in hash function then we can solve this problem by using double hash function
How would you write a function prototype for a function named calcAreaReact that accepts two arguments width and length and returns the area.?
double calcAreaRect (double a, double b);
How do you know double digit by double digit just like that?
Well its complicated to explain.
What is function Explain the user define function with example?
Function is a logically grouped piece of code allowing perform certain types of operations. Function can return value (int, double etc) or be void type - meaning they do not return value. Functions allow to make code cleaner by moving out chunks of code of main body. For instance you want to write a function that finds area of rectangular. #include <iostream> using std cin; using std cout; using std endl; using std get; int main() { double sideA = 0.0; cout << "Enter side a of rectagular: "; cin >> sideA; double sideB = 0.0; cout << endl << "Enter side b of rectangular: "; cin >> sideB; //This part passes sides a and b to user defined function "Square" cout << endl << "Area of rectangular is: " << Square(a, b); cin.get(); return 0; } //definition of user defined function Square double Square(double a, double b) { return (a * b); }
What is the function of double beam balance?
haha
