If your having trouble locking your doors with the infrared key then you can look all the doors by the trunck. Just simply insert key and turn to the right to lock or turn to the left to open.
It should lock when you lock your doors.
Remove the drivers side door panel of your Mercedes-Benz. Remove the door lock assembly retaining bolts. Remove the door lock linkage. The door lock assembly will come off.
you use the key in the door lock.
My 84 D turbo has the lock vacuum pump in with the spare tire .
the door handle pulls apart in two pieces to expose upper and lower Phillips screws, remove them then pull the door panel off gently to release the plastic retainer clips, once separated from the door unplug the seat and window switches then turn the panel clockwise to remove the door lock bar from the handle.
it is located under the rear seat on the right side
There are a couple of things that can cause your Mercedes-Benz driver door lock control to malfunction. The most common cause is a malfunctioning?ædoor lock relay switch.
Make sure the vehicle is unlocked. There is a pin that comes down when the doors lock.
I had this on an XC70 recently. (The key would turn to get the dashboard lights on, but that was it). The lock was broken and needed to be replaced. But the AA man did manage to force the key to work and this enabled me to use car for a few days awaiting the lock with the same code as before.
The lock for the access door for the gas cap is part of the lock system for the doors. If the car doors are locked the fuel door is locked also. Unlock the doors and the fuel door is unlocked also.
The lock for the access door for the gas cap is part of the lock system for the doors. If the car doors are locked the fuel door is locked also. Unlock the doors and the fuel door is unlocked also.
Gas cap door lock is tied into the vehicle vacuum lock system. If the car doors are unlocked than so should the trunk and gas cap door. Gas cap actuator can be accessed from the trunk.