I am told it is behind the front grill on the Ranger (Thunder / Wildcat). More specifically either mounted in front of the Radiator or in other cases near to /or below the LHS front headlamp.
On a 2002 Ford Ranger : The check " gage " light comes on if : The engine coolant temperature is TOO HIGH The engine oil pressure is TOO LOW or The fuel gauge is at or near empty
Where is the water temperature sender 1995 ford ranger 2.3?In: Ford [ranger]
Your check gauge light comes on if : your coolant temperature guage shows the temperature is high your oil pressure gauge shows the oil pressure is low or your fuel gauge shows the fuel tank is near empty
Bad Gauge---Electrical short---Bad fuse---Bad sending unit---loose or bad electrical connector to the gauge. Bad sensor. Had a faulty gauge on my 97 Ford Ranger. I changed the thermostat and the sending unit and the temperature sensor it started wotking beautifully.
If it's a 4 cylinder 2.3 liter motor the coolant gauge will have one wire. The terminal on the sensor will appear to look like it has threads on it.
One scenario could be that the sending unit for the gauge on the engine is bad. Try to locate it and replace it if it is corroded and check the wiring to it also.
Yes
Grey
yes it has both. at least in my 1991 ford ranger does
i have a 1990 ford ranger and my fule gauge always reads full, why?
According to my Chilton repair manual , fuse # 16 is a 15 amp fuse for the fuel gauge on a 1994 Ford Ranger
Either your engine coolant temperature is HIGH , your oil pressure is LOW , or your fuel gauge reads at or near empty