all bolts torqued to 15-22 ft lbs.
11 ft lbs
A GT intake will not directly bolt up to a V6 motor. While it is possible that the GT intake could be modified to fit, it would be more cost-effective to purchase an intake for a V6.
The v6 has 220 ft/lbs of torque and the GT (V8) has 302 ft/lbs of torque
I have a V6 2000 mustang the top speed I ever hit it was 120-125mph. Its only has a BBK Cold Intake
The standard 3.8 liter V6 2003 Ford Mustang has 190 horsepower.
ANSWER: The 2000 Ford Mustang 3.8L split-port v6 engine has 190Hp at 5250 rpm and 225 Ft-lbs of torque at 3000 rpm.
intake nut 89lb .in stud 106.lb.in plenum is 25nm
2000 3.8 Lower intake manifold (manifold to cylinder head) 1st step is 44 inch pounds, 2nd step is 89 inch pounds. This must be done in sequence.
Correct torque on 2000 model : 18 Ft. lbs.- upper intake manifold [ plenum ].
Start on the inside do an X pattern and work your way out
Yes, wheels from a 1998 Mustang will work on a 2000 Mustang.
torque to 30 to 35 then 2nd step to 90 degress 3rd step is anothern 90 degress